Please follow these steps:
- Reset the controller completely.
- Go to "Settings" and select "Security". Then, enable the checkbox for "Unknown sources".
- Download the appropriate DataPilot for your controller and save it on an empty microSD card.
- Install the DataPilot on the controller. Insert the microSD card with the downloaded DataPilot into the controller. Go to the yellow folder, then to the SD card, and double-click on "datapilot.apk". After installation, restart the controller.
- Launch the DataPilot and check for updates.
1. Reset the controller completely.
Then
After restarting:
2. Go to "Settings" and select "Security". Then, enable the checkbox for "Unknown sources".
Then
3. Download the appropriate DataPilot here:
Download the appropriate DataPilot for your controller and save it on an empty microSD card
4. Install the DataPilot on the controller.
Insert the microSD card with the downloaded DataPilot into the controller. Go to the yellow folder:
Then to the SD card, and double-click on "datapilot.apk". After installation, restart the controller.
Then
After the installation, restart the controller.
5. Launch the DataPilot and connect it to the drone and/or camera and check for updates.
You can be sure that your controller has been reset to its factory settings properly.
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article